WLAN0 and ETH0

From: S.M. (sm960215_at_po.jah.ne.jp)
Date: 2002-02-18 19:25:32 UTC


MY name is Seiichiro, writing from Tokyo/Japan. I found the HostAP driver in this project works fairly well, but I happened to have one serious problem.

As some says in previous mail...

> want to setup a bridge between my wired network and the
>wireless one for use with one wireless machine.
>At the moment if I create the bridge with eth0 and wlan0
>I can still connect via the wired lan but cannot
>ping from the wireless lan

I am experiencing the same problem with the following environment.

	Linux kernel 2.4.9
	Prism2 driver from this HP (Feb.13.2002)
	Ethernet   RealTeck 100BaseT
	IRQ assigned by BIOS   IRQ 5 shared (wlan ether)	

I am using a desktop PC with Richo CardBus-PCI bridge card, and PrismII based (Corega.K.K.) card. Wlan itself works fine with HostAP mode.

Any experience or advice will be helpfull for me. Many Thanks !!


This archive was generated by hypermail 2.1.4.