From: Eric Johanson (ericj_at_cubesearch.com)
Date: 2002-04-01 02:55:16 UTC
The only part of the dmesg output that looks fishy:
> Mar 31 16:50:56 bucky kernel: prism2: CardServices release does not
match!
That makes me think you should rebuild pcmcia-cs & the kernel, or maybe the related utils (Don't recall the name; I've never seen this issue)
hth.
-Eric
On Sun, 31 Mar 2002, jason wrote:
> I saw something similar in the archives to this list .. but I'm having
> problems getting the 650 to work through the 500 pci bridge.. i've tried
> this in most every configuration i can think of but here's the current one..
>
> any assistance would be appreciated
>
> -j
>
> 2.4.17 kernel
> using pcmcia-cs-3.1.33 for pcmcia
>
> this is all on top of debian unstable w/o the pcmcia deb installed
>
> PCIC_OPTS="irq_mode=0"
>
> my wireless.opts
>
> include port 0x100-0x4ff, port 0x800-0x8ff, port 0xc00-0xcff
> include memory 0xc0000-0xfffff
> include memory 0xfb000000-0xfbffffff, memory 0x60000000-0x60ffffff
> # Extra port range for IBM Token Ring
> include port 0xa00-0xaff
> # Resources we should not use, even if they appear to be available
> # First built-in serial port
> exclude irq 4
> # Second built-in serial port
> #exclude irq 3
> # First built-in parallel port
> exclude irq 7
>
> the odd memory bit was required to get it to find the pci bridge properly
>
> ### Error Message ####
>
> Starting PCMCIA services: modules cardmgr.
> cardmgr[375]: watching 1 sockets
> bucky:/var/log# Mar 31 16:50:55 bucky kernel: Linux PCMCIA Card Services
> 3.1.33
> Mar 31 16:50:55 bucky kernel: kernel build: 2.4.17 #3 SMP Sun Mar 31
> 15:34:59 CST 2002
> Mar 31 16:50:55 bucky kernel: options: [pci] [cardbus]
> Mar 31 16:50:55 bucky kernel: Intel ISA/PCI/CardBus PCIC probe:
> Mar 31 16:50:55 bucky kernel: PCI: Found IRQ 10 for device 00:0d.0
> Mar 31 16:50:55 bucky kernel: Ricoh RL5C475 rev 80 PCI-to-CardBus at slot
> 00:0d, mem 0x10000000
> Mar 31 16:50:55 bucky kernel: host opts [0]: [pci only] [io 3/6/1] [mem
> 3/6/1] [pci irq 10] [lat 32/176] [bus 3/6]
> Mar 31 16:50:55 bucky kernel: PCI card interrupts, PCI status changes
> Mar 31 16:50:55 bucky cardmgr[375]: watching 1 sockets
> Mar 31 16:50:55 bucky cardmgr[376]: starting, version is 3.1.33
> Mar 31 16:50:56 bucky kernel: cs: memory probe 0xfb000000-0xfbffffff: clean.
> Mar 31 16:50:56 bucky cardmgr[376]: socket 0: D-Link DWL-650 11Mbps WLAN
> Card
> Mar 31 16:50:56 bucky cardmgr[376]: executing: 'modprobe prism2'
> Mar 31 16:50:56 bucky kernel: prism2: prism2.c 0.0.0 2002-03-27 (SSH
> Communications Security Corp, Jouni Malinen)
> Mar 31 16:50:56 bucky kernel: prism2: (c) SSH Communications Security Corp
> <jkm_at_ssh.com>
> Mar 31 16:50:56 bucky kernel: prism2: CardServices release does not
match!
> Mar 31 16:50:56 bucky cardmgr[376]: + /lib/modules/2.4.17/pcmcia/prism2.o:
> init_module: Operation not permitted
> Mar 31 16:50:56 bucky cardmgr[376]: + /lib/modules/2.4.17/pcmcia/prism2.o:
> insmod /lib/modules/2.4.17/pcmcia/prism2.o failed
> Mar 31 16:50:56 bucky cardmgr[376]: + /lib/modules/2.4.17/pcmcia/prism2.o:
> insmod prism2 failed
> Mar 31 16:50:56 bucky cardmgr[376]: + Hint: insmod errors can be caused by
> incorrect module parameters, including invalid IO or IRQ parameters
> Mar 31 16:50:56 bucky cardmgr[376]: modprobe exited with status 255
> Mar 31 16:50:56 bucky cardmgr[376]: executing: 'insmod
> /lib/modules/2.4.17/pcmcia/prism2.o'
> Mar 31 16:50:56 bucky kernel: prism2: prism2.c 0.0.0 2002-03-27 (SSH
> Communications Security Corp, Jouni Malinen)
> Mar 31 16:50:56 bucky kernel: prism2: (c) SSH Communications Security Corp
> <jkm_at_ssh.com>
> Mar 31 16:50:56 bucky kernel: prism2: CardServices release does not match!
> Mar 31 16:50:56 bucky cardmgr[376]: + /lib/modules/2.4.17/pcmcia/prism2.o:
> init_module: Operation not permitted
> Mar 31 16:50:56 bucky cardmgr[376]: + Hint: insmod errors can be caused by
> incorrect module parameters, including invalid IO or IRQ parameters
> Mar 31 16:50:56 bucky cardmgr[376]: insmod exited with status 1
> Mar 31 16:50:57 bucky cardmgr[376]: get dev info on socket 0 failed:
> Resource temporarily unavailable
> Mar 31 16:50:57 bucky cardmgr[376]: wrong module 'prism2' for device
> 'prism2'?
>
>
>
>
>
>
>
>