From: Andrew Bielecki (prism2_at_bielecki.org)
Date: 2002-07-14 04:28:25 UTC
Hi
I have Compaq 7400 with Dlink DWL_650 card using hostap_cs driver
communicating with Dlink 713P access point. The driver is working with
sporadic lockup but this is not the bigest problem. I notice that when
downloading file to my system (RX) I'm getting about 370Kb/s but I
can't upload (TX) procticaly anything. The driver stop working after
about 9MB of upload and the only thing I can do at this point is to
eject the card and insert it again. I notice that I have same problem
with orinoco_cs driver. I suspect that problem is in pcmcia driver and
not with hostap_cs driver since both hostap_cs and orinoco_cs drivers
having similar problems. I wonder if anybody found the solution to this
problem.
TIA
Andrew Bielecki
These are some of my configuration files I'm using:
#cat /etc/sysconfig/pcmcia
PCMCIA=yes
PCIC=i82365
PCIC_OPTS="irq_mode=1 pci_csc=0 poll_interval=100"
CORE_OPTS=
CARDMGR_OPTS="-q -v"
SCHEME=essidany
#cat /proc/interrupts
CPU0
0: 3245158 XT-PIC timer
1: 9888 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 48391 XT-PIC hostap_cs
8: 1 XT-PIC rtc
11: 337 XT-PIC usb-ohci, Texas Instruments PCI1250,
Texas Instruments PCI1250 (#2)
12: 241713 XT-PIC PS/2 Mouse
14: 37654 XT-PIC ide0
NMI: 0
LOC: 0
ERR: 50
MIS: 0
#cardctl config
Socket 0:
Vcc 3.3V Vpp1 0.0V Vpp2 0.0V
interface type is "memory and I/O"
irq 5 [exclusive] [level]
function 0:
config base 0x03e0
option 0x41
io 0x0140-0x017f [16bit]
Socket 1:
not configured
#cardctl ident
Socket 0:
product info: "D", "Link DWL-650 11Mbps WLAN Card", "Version 01.02", ""
manfid: 0x0156, 0x0002
function: 6 (network)
Socket 1:
no product info available