From: Quintawifi1 (quintawifi1_at_eresmas.com)
Date: 2002-08-01 12:18:53 UTC
Hi! i have finished configuring my card with orinoco_cs or hostap_cs.
But i still don't know some points.
What is the module ds??i'm not able to uninstall it, and in other
configs you have sent me you don't have it.
-----------------------------------------------lsmod:---- Module Size Used by Not tainted nls_cp437 4384 2 (autoclean) orinoco_cs 4712 2 orinoco 29568 0 [orinoco_cs] hermes 3296 0 [orinoco_cs orinoco] ds 6624 1 [orinoco_cs] i82365 22416 1 pcmcia_core 41408 0 [orinoco_cs ds i82365] keybdev 1664 0 (unused) usbkbd 2848 0 (unused) input 3072 0 [keybdev usbkbd] usb-ohci 17472 0 (unused) usbcore 48032 0 [usbkbd usb-ohci]
And the card is still giving some errors, like this: How do i solve the mentioned promiscous error?
...
ds: no socket drivers loaded!
unloading PCMCIA Card Services
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
Linux PCMCIA Card Services 3.1.33
kernel build: 2.4.18-bf2.4 unknown
options: [pci] [cardbus] [apm]
Intel ISA/PCI/CardBus PCIC probe:
PCI: Enabling device 00:08.0 (0000 -> 0002)
AMD756: dev 1180:0475, router pirq : 1 get irq : 0
AMD756: dev 1180:0475, router pirq : 1 SET irq : 5
PCI: Assigned IRQ 5 for device 00:08.0
Ricoh RL5C475 rev 80 PCI-to-CardBus at slot 00:08, mem 0x10000000
host opts [0]: [isa irq] [io 3/6/1] [mem 3/6/1] [pci irq 5] [lat
168/176] [bus 2/5]
ISA irqs (default) = 3,4,5,7,12 PCI status changes
cs: memory probe 0xa0000000-0xa0ffffff: clean.
hermes.c: 16 Jan 2002 David Gibson <hermes_at_gibson.dropbear.id.au>
orinoco.c 0.09b (David Gibson <hermes_at_gibson.dropbear.id.au> and others)
orinoco_cs.c 0.09b (David Gibson <hermes_at_gibson.dropbear.id.au> and
others)
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x3c0-0x3df
0x4d0-0x4d7
cs: IO port probe 0x0380-0x03bf: clean. cs: IO port probe 0x03e0-0x04cf: clean. cs: IO port probe 0x04d8-0x04ff: clean. cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0a00-0x0aff: clean. cs: IO port probe 0x0c00-0x0cff: clean. eth1: Station identity 001f:0003:0000:0008 eth1: Looks like an Intersil firmware version 0.08 eth1: Ad-hoc demo mode supported eth1: IEEE standard IBSS ad-hoc mode supported eth1: WEP supported, 104-bit key eth1: MAC address 00:50:C2:01:9B:E1 eth1: Station name "Prism I" eth1: ready eth1: index 0x01: Vcc 3.3, irq 3, io 0x0100-0x013f eth1: Error -110 setting PROMISCUOUSMODE to 1.eth1: Error -110 setting PROMISCUOUSMODE to 1. eth1: Error -110 setting PROMISCUOUSMODE to 1.
...
Thanks a lot for your help.
Bye and regards from Spain!!
Rafa