Problem initializing card


From: David Levitan (david_at_dlevitan.com)
Date: 2002-08-03 04:39:33 UTC



Hi,
I recently upgraded my server (which runs hostap) to a dual athlon 1600 system. I had problems getting memory address space for pcmcia-cs, but eventually installed Win2K on the system and got the address spaces that Win2K used. The card is now recognized correctly and the hostap_cs driver is loaded. However, I get the following messages in dmesg: hostap_crypt: registered algorithm 'NULL' hostap_cs: hostap_cs.c 0.0.0 2002-05-19 (SSH Communications Security Corp, Jouni Malinen)

hostap_cs: (c) SSH Communications Security Corp <jkm_at_ssh.com>
hostap_cs: setting Vcc=33 (constant)
hostap_cs: CS_EVENT_CARD_INSERTION
prism2_config()
hostap_cs: setting Vcc=33 (from config)

Checking CFTABLE_ENTRY 0x01 (default 0x01) IO window settings: cfg->io.nwin=1 dflt.io.nwin=1 io->flags = 0x0046, io.base=0x0000, len=64
cs: IO port probe 0x0a00-0x0aff: clean.
cs: IO port probe 0xac00-0xacff: clean.
cs: IO port probe 0xb000-0xb0ff: clean.
cs: IO port probe 0xb800-0xb8ff: clean.
cs: IO port probe 0xbc00-0xbcff: clean.
hostap_cs: index 0x01: Vcc 3.3, irq 19, io 0x0a00-0x0a3f
hostap_cs: Registered netdevice wlan0
prism2_hw_init()
wlan0: hfa384x_cmd - timeout - reg=0xffff hostap_cs: first command failed - is the card compatible? hostap_cs: Initialization failed
wlan0: hfa384x_cmd_issue: cmd reg was busy for 1000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0xffff
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fdc6, len=12)

The last three lines are repeated. The card does not work. Any idea what the problem is? The card worked perfectly in my old system. The PCMCIA interface has not changed.
Thanks,
David Levitan



This archive was generated by hypermail 2.1.4.