Cant get Comapaq WL110 pccard in AP mode


From: Joachim Wickman (jwickman_at_tawi.fi)
Date: 2002-08-12 14:38:26 UTC



Hello,

I've searched for Compaq WL100 or WL200 , but didn't find any. So I bought a new WL110 pccard.
I can�t get it to work in AP mode.

from /var/log/messages
--

Aug 12 17:17:06 lappari cardmgr[196]: socket 1: Compaq WL210
Aug 12 17:17:07 lappari cardmgr[196]: executing: 'modprobe hostap_cs'
Aug 12 17:17:07 lappari kernel: hostap_cs: hostap_cs.c 0.0.0 CVS (SSH
Communications Securit
Aug 12 17:17:07 lappari kernel: hostap_cs: index 0x01: Vcc 5.0, irq 3, io 0x0100-0x013f
Aug 12 17:17:07 lappari kernel: hostap_cs: Registered netdevice wlan0
Aug 12 17:17:07 lappari kernel: wlan0: NIC: id=0x01 v4.2.1
Aug 12 17:17:07 lappari kernel: wlan0: PRI: id=0x15 v4.4.1
Aug 12 17:17:07 lappari kernel: wlan0: STA: id=0x1f v8.10.1

and from /var/log/debug
---

Aug 12 17:17:07 lappari kernel: hostap_crypt: registered algorithm 'NULL'
Aug 12 17:17:07 lappari kernel: hostap_cs: setting Vcc=33 (constant)
Aug 12 17:17:07 lappari kernel: hostap_cs: CS_EVENT_CARD_INSERTION
Aug 12 17:17:07 lappari kernel: prism2_config()
Aug 12 17:17:07 lappari kernel: hostap_cs: setting Vcc=50 (from config)
Aug 12 17:17:07 lappari kernel: Checking CFTABLE_ENTRY 0x01 (default 0x01)
Aug 12 17:17:07 lappari kernel: IO window settings: cfg->io.nwin=1
dflt.io.nwin=1
Aug 12 17:17:07 lappari kernel: io->flags = 0x0046, io.base=0x0000, len=64
Aug 12 17:17:07 lappari kernel: prism2_hw_init()
Aug 12 17:17:07 lappari kernel: prism2_hw_config: initialized in 3003
iterations
Aug 12 17:17:07 lappari kernel: wlan0: LinkStatus=2 (Disconnected)
Aug 12 17:17:07 lappari kernel: wlan0: LinkStatus=1 (Connected)
Aug 12 17:17:07 lappari kernel: wlan0: LinkStatus=2 (Disconnected)
Aug 12 17:17:07 lappari kernel: wlan0: LinkStatus=2 (Disconnected)
Aug 12 17:17:07 lappari kernel: wlan0: LinkStatus=1 (Connected)
Aug 12 17:17:07 lappari kernel: wlan0: LinkStatus=2 (Disconnected)
Aug 12 17:17:07 lappari kernel: wlan0: LinkStatus=1 (Connected)
Aug 12 17:17:07 lappari kernel: wlan0: prism2_open
Aug 12 17:17:18 lappari kernel: wlan0: LinkStatus=1 (Connected)
Aug 12 17:26:41 lappari kernel: wlan0: hfa384x_get_rid_copy - RID len
mismatch: rid=0xfc82,

and now the Lucent Orinoco Win98 machine is connected... but as peer-to-peer
DHCP didn't work and havent tested with static IPs , because I'm more interested in AP mode.

Does someone know if WL110 works in AP mode?

// Joachim



This archive was generated by hypermail 2.1.4.