z-comax xi-325h

From: Hrochoun (hrochoun_at_volny.cz)
Date: 2002-09-08 15:04:34 UTC

• Next message: Jouni Malinen: "Re: No backlevel support for kernel 2.2.19"
• Previous message: Victor Aleo: "Help!: Load distribution prototype"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

hello,

I have problem with this card. I use latest cvs snapshot and it works:

Sep 7 14:40:53 K2 kernel: hostap_cs: hostap_cs.c 0.0.0 CVS (SSH Communications Security Corp, Jouni Malinen) Sep 7 14:40:53 K2 kernel: hostap_cs: (c) SSH Communications Security Corp <jkm_at_ssh.com>
Sep 7 14:40:53 K2 kernel: hostap_cs: index 0x01: Vcc 5.0, irq 3, io 0x0180-0x01bf

Sep  7 14:40:53 K2 kernel: hostap_cs: Registered netdevice wlan0
Sep  7 14:40:53 K2 kernel: wlan0: NIC: id=0x800c v1.0.0
Sep  7 14:40:53 K2 kernel: wlan0: PRI: id=0x15 v1.0.7
Sep  7 14:40:53 K2 kernel: wlan0: STA: id=0x1f v1.3.6

but with problems: iwconfig reports that tx-power periodicaly changes from -40 to 20Db. if I try set it with iwconfig wlan0 txpower 20 - iwconfig reports this value (no more changing), but it has no real effect.

stations normaly connects(working tcp/ip) to HostAP in master mode, but only on 1 or 2Mbps rate with full signal(snr 50 and more) - avaya klient software reports:

this station: 30% packets - 2Mbps, 70% - 1Mbps ap: 100% packets - 11Mbps

thanks for any idea

zbynek

my configuration:
linux 2.4.19 and 2.4.20-pre5 + patch for wirelessext. v.15(same problem without this patch)
wirelesstools 25 and 26 pre
pcmcia_cs 3.1.34 and 3.2.1
hw - old fujitsu lifebook,zcomax xi-325h,avaya silver

• Next message: Jouni Malinen: "Re: No backlevel support for kernel 2.2.19"
• Previous message: Victor Aleo: "Help!: Load distribution prototype"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]
• Mail actions: [ respond to this message ] [ mail a new topic ]