From: Dave Hinkle (hinkle_at_DerbyWorks.com)
Date: 2002-10-03 15:22:25 UTC
Hello guys :-) I've been playing with the hostap package but I cant make it
work in master mode with the two cards above. I thought I'd ask if anybody
else had gotten them to work, so I'd know if I'm making a mistake.
Sometimes they load silently, other times they dump out a bunch of errors,
I've excerpted them below in case anybody understands them.
If they don't work, what cards do? Anything I can put an external antenna on?
Thanks much
Jan 24 16:23:40 (none) kernel: hostap_cs: index 0x01: Vcc 5.0, irq 10, io 0x0100-0x013f
Jan 24 16:23:40 (none) kernel: hostap_cs: Registered netdevice wlan0 Jan 24 16:23:40 (none) kernel: prism2_hw_init() Jan 24 16:23:40 (none) kernel: prism2_hw_config: initialized in 3580iterations
Jan 24 16:23:40 (none) kernel: wlan0: NIC: id=0x01 v4.3.5 Jan 24 16:23:40 (none) kernel: wlan0: PRI: id=0x15 v4.4.1 Jan 24 16:23:40 (none) kernel: wlan0: STA: id=0x1f v7.28.1 Jan 24 16:23:40 (none) kernel: wlan0: CMD=0x0121 => res=0x7f, resp0=0x0004 Jan 24 16:23:40 (none) kernel: wlan0: hfa384x_set_rid: CMDCODE_ACCESS_WRITEfailed (res=127, rid=fc33, len=2)
Jan 24 16:23:40 (none) kernel: wlan0: Beacon interval setting to 100 failed Jan 24 16:23:40 (none) kernel: wlan0: CMD=0x0121 => res=0x7f, resp0=0x0004 Jan 24 16:23:40 (none) kernel: wlan0: hfa384x_set_rid: CMDCODE_ACCESS_WRITEfailed (res=127, rid=fcb3, len=2)
Jan 24 16:23:40 (none) kernel: wlan0: Basic rates setting failed Jan 24 16:23:40 (none) kernel: wlan0: CMD=0x0121 => res=0x7f, resp0=0x0004 Jan 24 16:23:40 (none) kernel: wlan0: hfa384x_set_rid: CMDCODE_ACCESS_WRITEfailed (res=127, rid=fcb4, len=2)
Jan 24 16:23:40 (none) cardmgr[54]: executing: './network start wlan0' Jan 24 16:23:40 (none) kernel: wlan0: Supported rates setting failed Jan 24 16:23:40 (none) kernel: wlan0: CMD=0x0121 => res=0x7f, resp0=0x0004 Jan 24 16:23:40 (none) kernel: wlan0: hfa384x_set_rid: CMDCODE_ACCESS_WRITEfailed (res=127, rid=fc10, len=2)