Coampaq WL200 & prism2

From: Jarkko Raja (jarkko.raja_at_veo.fi)
Date: 2002-02-28 12:39:44 UTC


Hi !

This is my dmesg printout. Can anyone tell what the [RetryErr] messages menas.
I get this king of messages and also "invalid misc" errors in iwconfig. Sometimes
the Compaq's card suddenly stop working and the the pcmcia has to be restarted to
get is working again. Do I have problems in PCI, Pcmcia, WL200, Firmware or driver or
is this normal ?

...
...

Linux PCMCIA Card Services 3.1.31
  kernel build: 2.4.9-21custom unknown
  options: [pci] [cardbus] [apm]
Intel ISA/PCI/CardBus PCIC probe:
PCI: Found IRQ 12 for device 00:0a.0
  Cirrus PD6729 rev 00 PCI-to-PCMCIA at slot 00:0a, port 0xe000     host opts [0]: [ring] [pci irq 12] [1/5/0] [1/20/0]     host opts [1]: [ring] [pci irq 12] [1/5/0] [1/20/0]     PCI card interrupts, PCI status changes cs: memory probe 0x0d0000-0x0dffff: clean. prism2: prism2.c 0.0.0 2002-02-13 (SSH Communications Security Corp, Jouni Malinen) 

prism2: (c) SSH Communications Security Corp <jkm_at_ssh.com>
prism2: setting Vcc=33 (constant)
prism2: CS_EVENT_CARD_INSERTION

prism2_config()
prism2: setting Vcc=33 (from config)
CISTPL_MANFID: 0x0138, 0x0002
Checking CFTABLE_ENTRY 0x01 (default 0x01) Config has no IRQ info, but trying to enable IRQ anyway.. IO window settings: cfg->io.nwin=1 dflt.io.nwin=1 io->flags = 0x0046, io.base=0x0000, len=64 
cs: IO port probe 0x0100-0x04ff: excluding 0x3c0-0x3df 0x4d0-0x4d7
cs: IO port probe 0x03e0-0x04cf: clean.
cs: IO port probe 0x04d8-0x04ff: clean.
cs: IO port probe 0x0c00-0x0cff: clean.

prism2: index 0x01: Vcc 3.3, irq 12, io 0x0100-0x013f prism2: Registered netdevice wlan0
prism2_hw_config()
prism2_hw_config: initialized in 9667 iterations 
wlan0: NIC: id=0x8002 v1.0.1
wlan0: PRI: id=0x15 v0.3.0
wlan0: STA: id=0x1f v1.3.4
wlan0: INFO - fid=0x02d5 - len=2 type=0xf200
  LinkStatus=1 (Connected)
prism2_open
wlan0: TXEXC - fid=0x027d - status=0x0001 ([RetryErr]) tx_control=000e

   retry_count=0 tx_rate=0 fc=0x0808 (Data::0)    addr1=00:50:8b:46:c4:42 addr2=00:50:8b:46:c4:53 addr3=02:05:e6:1a:c4:0c
wlan0: TXEXC - fid=0x0336 - status=0x0001 ([RetryErr]) tx_control=000e

   retry_count=0 tx_rate=0 fc=0x0808 (Data::0)    addr1=00:50:8b:46:c4:42 addr2=00:50:8b:46:c4:53 addr3=02:05:e6:1a:c4:0c
wlan0: TXEXC - fid=0x0148 - status=0x0001 ([RetryErr]) tx_control=000e

   retry_count=0 tx_rate=0 fc=0x0808 (Data::0)    addr1=00:50:8b:46:c4:42 addr2=00:50:8b:46:c4:53 addr3=02:05:e6:1a:c4:0c
wlan0: TXEXC - fid=0x016e - status=0x0001 ([RetryErr]) tx_control=000e

   retry_count=0 tx_rate=0 fc=0x0808 (Data::0)    addr1=00:50:8b:46:c4:42 addr2=00:50:8b:46:c4:53 addr3=02:05:e6:1a:c4:0c
wlan0: TXEXC - fid=0x05c2 - status=0x0001 ([RetryErr]) tx_control=000e

   retry_count=0 tx_rate=0 fc=0x0808 (Data::0)    addr1=00:50:8b:46:c4:42 addr2=00:50:8b:46:c4:53 addr3=02:05:e6:1a:c4:0c
wlan0: TXEXC - fid=0x01c8 - status=0x0001 ([RetryErr]) tx_control=000e

   retry_count=0 tx_rate=0 fc=0x0808 (Data::0)    addr1=00:50:8b:46:c4:42 addr2=00:50:8b:46:c4:53 addr3=02:05:e6:1a:c4:0c
wlan0: TXEXC - fid=0x02f4 - status=0x0001 ([RetryErr]) tx_control=000e

   retry_count=0 tx_rate=0 fc=0x0808 (Data::0)    addr1=00:50:8b:46:c4:42 addr2=00:50:8b:46:c4:53 addr3=02:05:e6:1a:c4:0c
wlan0: TXEXC - fid=0x0394 - status=0x0001 ([RetryErr]) tx_control=000e

   retry_count=0 tx_rate=0 fc=0x0808 (Data::0)    addr1=00:50:8b:46:c4:42 addr2=00:50:8b:46:c4:53 addr3=02:05:e6:1a:c4:0c
wlan0: TXEXC - fid=0x0144 - status=0x0001 ([RetryErr]) tx_control=000e

   retry_count=0 tx_rate=0 fc=0x0808 (Data::0)    addr1=00:50:8b:46:c4:42 addr2=00:50:8b:46:c4:53 addr3=02:05:e6:1a:c4:0c

Regards,

Jarkko

This archive was generated by hypermail 2.1.4.