From: Jason Price (wireless_at_inetica.com)
Date: 2002-07-02 00:40:02 UTC
To all out there running a DWL-650 on a older laptop..
adding this to /etc/modules.conf fixed my issue:
options hostap_cs ignore_cis_vcc=1
Jason
Ps. Thanks again Eric for your help.
> The "GetNextTuple: No more items"
>
> Is a classic VCC problem.
>
> You can try setting ignore_cis_vcc=1 in the pcmcia config...
>
> Otherwise, you can try playing with the cis file to have it set the
> correct voltage for the card - - I don't recall what the dlink card
> requires, but I DO recall having issues making it work with some pcmcia
> chipsets that didn't provide the correct voltage. Check which voltage
> (3.3 or 5) the card requires, and ensure that your chipset supports it.
>
> I had thought that the Dlink card required cardbus; this is not the case,
> it just needs the correct voltage (Don't trust marketing fluff).
>
> -Eric
>
> PS. I was most unhappy with the dlink performance after I got it working,
> so I tossed it for a linksys. This was pre- hostap days. :)
>
> On Mon, 1 Jul 2002, Jason Price wrote:
>
> > Hello all:
> > trying to get my dlink card to work with hostap driver. I have been
banging my head against the wall for about 4 days now. This card is running
on a older compaq LTE 5380 , which im able to get my lucent card working
with the wavelan drivers. also the DWL-650 works in winbows on the same
laptop. so to cont my story.. beat my head against a wall for 3 days trying
to get the hostap driver to work with no luck.. so i decided to take the
drive out of the compaq LTE 5380 and install it in my dell insprion 7000 (
reinstall the distro ) well low and behold it worked on the first try, but
when i swaped the drive back i get the following listed below: I did take
some notes while the drive was running on the dell... (index 0x01 irq 9 0x01
00-0x013f) irq 9 doesn't look used on the compaq.. Im stumped. if anyone
could help me that would be great.
> >
> > Thanks Jason
> >
> > CARD DLINK DWL-650
> >
> > lsmod
> > Module Size Used by
> > hostap_cs 80368 0 (unused)
> > 8390 6032 0 (unused)
> >
> > cat /etc/pcmcia/config.opts
> >
> > # System resources available for PCMCIA devices
> > #include port 0x0180-0x01bf, port 0x0100-0x013f
> > include port 0x100-0x4ff, port 0x800-0x8ff, port 0xc00-0xcff
> > #include port 0x100-0x4ff, port 0x100-0x13f, port 0x156-0x002, port
0x800-0x8ff, port 0xc00-0xcff
> > include memory 0xc0000-0xfffff
> > include memory 0xa0000000-0xa0ffffff, memory 0x60000000-0x60ffffff
> > include irq 9
> > include irq 11
> > # High port numbers do not always work...
> > include port 0x1000-0x17ff
> >
> > # Extra port range for IBM Token Ring
> > #include port 0xa00-0xaf
> >
> >
> >
> > cat /proc/interrupts
> > CPU0
> > 0: 102354 XT-PIC timer
> > 1: 137 XT-PIC keyboard
> > 2: 0 XT-PIC cascade
> > 3: 1442 XT-PIC pcnet_cs
> > 14: 2162 XT-PIC ide0
> > NMI: 0
> > ERR: 0
> >
> >
> > Dmesg:
> > Symbols match kernel version 2.4.18.
> > Linux Kernel Card Services 3.1.22
> > options: [pm]
> > Intel PCIC probe:
> > Cirrus PD672x ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 2 sockets
> > host opts [0]: [ring] [65/6/3] [1/15/3]
> > host opts [1]: [ring] [65/6/3] [1/15/3]
> > ISA irqs (default) = 3,4,5,7,9,10,11,12 polling interval = 1000 ms
> > Databook TCIC-2 PCMCIA probe: not found.
> > pci_hotplug: PCI Hot Plug PCI Core version: 0.3
> > cs: IO port probe 0x0c00-0x0cff: excluding 0xc28-0xc2f
> > cs: IO port probe 0x0800-0x08ff: excluding 0x828-0x82f
> > cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x320-0x327
0x388-0x38f 0x428-0x42f 0x480-0x48f
> > cs: IO port probe 0x1000-0x17ff: excluding 0x1028-0x102f 0x13f0-0x13f7
0x1428-0x142f 0x17f0-0x17f7
> > cs: memory probe 0x0d0000-0x0dffff: clean.
> > eth0: NE2000 Compatible: io 0x300, irq 3, hw_addr 00:E0:98:04:18:1F
> > hostap_cs: hostap_cs.c 0.0.0 2002-05-19 (SSH Communications Security
Corp, Jouni Malinen)
> > hostap_cs: GetNextTuple: No more items
> >
> > /var/log/messages:
> > cardmgr[36]: socket 1: Intersil PRISM2 11 Mbps Wireless Adapter
> > cardmgr[36]: executing: 'modprobe hostap_cs'
> > hostap_cs: hostap_cs.c 0.0.0 2002-05-19 (SSH Communications Security
Corp, Jouni Malinen)
> > hostap_cs: GetNextTuple: No more items
> > get dev info on socket 1 failed: Resource temporarily unavailable
> >
> >
> > cardctl ident
> > Socket 0:
> > product info: "Ethernet", "Adapter", "2.0"
> > manfid: 0x0149, 0xc1ab
> > function: 6 (network)
> > Socket 1:
> > product info: "D", "Link DWL-650 11Mbps WLAN Card", "Version 01.02",
""
> > manfid: 0x0156, 0x0002
> > function: 6 (network)
> >
> > cardmgr -V
> > cardmgr version 3.1.34
> >
>