From: Robert Botha (flash_at_flash.za.org)
Date: 2002-07-26 07:08:00 UTC
>> �Is dangerous?
>
> There is a change of rendering the card in a non-working state by
> flashing something incorrect.. Fixing this would require somewhat
> complex method of reinitializing the flash and this might require some
> hardware modifications with some card models. In other words, it might
> be bit difficult to find free support for this. I have written some code
> for flashing with Host AP driver, but I will not be releasing it before
> I'm pretty sure it is working 100% correctly and tries to avoid any
> problems..
>
Hehe...I've messed up quite a few Samsung SWL-2000P cards using the
prism2dl utility.
You have to double check that you flash the right firmware for the right
hardware. Normally secondary firmware isn't a problem as long as the hw
matches.
-- Robert Botha