From: Michael Milligan (milli_at_acmeps.com)
Date: 2002-08-08 19:45:01 UTC
Jouni Malinen wrote:
> Which secondary station firmware are you using? Driver outputs this in
> the kernel log that can be checked, e.g., with 'dmesg'.
(I should have included this to start with... sorry)
hostap_crypt: registered algorithm 'NULL' hostap_pci: hostap_pci.c 0.0.0 CVS (SSH Communications Security Corp, Jouni Malinen)
hostap_pci: (c) SSH Communications Security Corp <jkm_at_ssh.com> hostap_pci: Registered netdevice wlan0 prism2_hw_init() prism2_hw_config: initialized in 17312 iterations wlan0: NIC: id=0x8013 v1.0.0 wlan0: PRI: id=0x15 v1.0.7 wlan0: STA: id=0x1f v1.3.5 wlan0: LinkStatus=2 (Disconnected) wlan0: Intersil Prism2.5 PCI: mem=0xfc0ff000, irq=18 wlan0: LinkStatus=2 (Disconnected)
>> wlan0 IEEE 802.11-b ESSID:"MyLANgoAWAY" >> Mode:Master Frequency:2.437GHz Access Point: 00:05:3C:00:FB:C9
>>A known-good-working card never sees it.
I read that in the FAQ and wasn't worried since this has v1.3.5. But, I'm going to play around with RAM download support to try a couple different station firmware versions and see if anything changes.
Thanks and regards,