From: Jouni Malinen (jkmaline_at_cc.hut.fi)
Date: 2002-08-24 17:17:26 UTC
On Mon, Aug 19, 2002 at 09:46:09AM +0900, Chris Harrington wrote:
> I would like to report a new supported card ( and a problem ) :
> hostap_cs.conf entry:
> card "Buffalo WLI-CF-S11G"
> version "BUFFALO", "WLI-CF-S11G"
> # manfid 0x026f, 0x030b
> bind "hostap_cs"
Thanks, I added this for the next release.
> If a serial pcmcia card is inserted in the other PCMCIA slot before
> boot, the system freezes at the point where it loads 'modprobe
> hostap_cs'
> ( no problems up to that point, serial card is in slot 0 and recognised
> first, no PCMCIA or cardctl errors in /var/log/messages ). If the same
> serial card is inserted after boot ( followed by # cardctl insert 0 )
> the system freezes with no errors. Again, this is probably a problem
> with my PCMCIA configurations, but any information would be much
> appreciated.
I can't really help much with this. I would agree that this is probably a pcmcia-cs configuration problem. PCMCIA HOWTO has some information on debugging crashes and I would recomment going through it. I know that hostap_cs.o works fine with two cards on the same host, so I would start removing irq/ioports to test another selection, etc.
-- Jouni Malinen PGP id EFC895FA